Axial EC Fan Modification Module

The Axial EC fan with AAD TECH control is available in frame sizes 450 to 1000 mm.

Key Features

Low noise emissions: Impeller rotor unit dynamically balanced in two levels.
High balance quality.
Precise roundness ensures minimal air gap.
High efficiency: Achieved With the help of Aad Tech EC System.
Flexible installation: It can be installed with horizontal and vertical motor shafts from intake or pressure side.
Dimentional benifits: Completely Variable aspect ratio.
Fan grid is the solution for optimized flow of air through the system.
Aad Tech Axial fan system can reduce the size of the system upto 40-45% without losing any efficiency.
Easy Controllability and communication: Easily integration with existing BMS system.
Real time system monitoring.
Manual control or automatic fan speed varies according to the demand of load.

The system assembly is designed to withstand a wide range of Voltage ranges and has inbuilt checks to handle Surge and Swells.
The system assembly is designed to withstand a wide range of relative humidity (10% to 100%) conditions.
The system is balanced dynamically so Balancing is not required throughout the life time.
Faults related to Pulley, shaft and belt do not occur.
Faults related to fuses and general VFD malfunction do not occur.
The system is designed with HQ bearings so the bearing maintenance is nil and bearing related faults do not occur.
The system assembly is designed to withstand highly corrosive environments so the faults due to corrosion and metal degradation do not occur.
Ready BMS and Standalone sensor integration ensures man less operation with easy operational procedures.